Assess seam strength, elongation, and shrinkage after heat exposure.
Simulate real industrial dust to measure retention rate under load.
Industrial Filter Bag Solutions for Dust Collection Systems
- Custom Material Selection
- OEM Manufacturing
- Global Supply
Dust Collector Filter Bags
We are committed to solving the challenges of filter bag blockage, short lifespan, and excessive emissions!
Dust Collector Filter Bags are key components in industrial dust collection systems, designed to capture particulate matter efficiently while ensuring stable system operation.
With proper filter media selection, they help reduce emissions, protect equipment, and maintain compliance with environmental regulations.
Nomex(Aramid) Filter Bags
Excellent heat and chemical resistance, widely used in cement, power, and chemical industries.
PTFE Filter Bag
Exceptional acid/alkali resistance and high-temp tolerance (260°C), easily meets emission standards.
P84 (Polyimide) Filter Bag
High-temp (260°C) and corrosion resistance, perfect for chemical and asphalt plants.
FMS Filter Bag
FMS Filter Bags handle 260°C+ with great abrasion and corrosion resistance—longer life, less hassle and cost in cement and steel plants.
GlassFiber Filter Bag
Continuous 280°C resistance, ideal for cement kilns and steel plants.
Acrylic Dust Collection Filter Bag
Tough Against Acids & Hydrolysis! Ideal for chemical and waste incineration.
Antistatic Filter Bag
Conductive fibers eliminate static risks. Precision craftsmanship ensures reliable safety – trusted by mining and chemical plants.
Water & Oil Repellent Filter Bag
Special treatment repels water and oil for easy cleaning.
CareClean® Low Resistance Filter Bags
◎ Lower Emission(<5mg/Nm³)
◎ Higher Airflow Rate
◎ Lower Energy Cost
Filter Bags by Industry Application
Different industries produce different dust characteristics — temperature, moisture, abrasiveness and corrosion.We recommend filter media based on real operating conditions.
Steel & Metallurgy
Cement & Building Materials
Power Generation
Waste Incineration
Chemical & Mining
Asphalt Mixing Plants
Filter Bags for All Baghouse Styles
Aokai manufactures filter bags of any baghouse styles, configurations, and sizes.
Baghouse Style
Pulse Jet Filter Bags
Aokai manufactures pulse-jet filter bags. With supporting cages, these bags allow airflow from the exterior of the bag and exiting through the interior. Top constructions consist of a snap band, flange top, ring top, soft cuffs, or raw edge. Bottom removal bags are constructed with a raw top or soft cuff. Top and bottom removal filter bags have disc bottoms. A wear strip is sometimes attached to the bottom portion of the filter bag to prevent any premature wear from bag-to-bag and bag-to-cage abrasion.
Baghouse Style
Reverse Air Filter Bags
Aokai manufactures a wide variety of reverse-air bags. Typical top designs are strap top, loop top, cord top cuff, compression band with steel caps, or grommet top bags. Bottoms include raw edge, cuffed, compression band, or beaded cuff. Anti-collapse rings of mild steel, stainless steel, and other alloys are placed along the bag at the proper points for maximum cleaning efficiency.
Baghouse Style
Shaker Filter Bags
Aokai provides a wide variety of filter bags for use in shaker-type collectors. We manufacture filter bags from woven and shaker felt. We offer various types of top attachments to work with the shaker mechanism you have, whether it is a loop, hanger, strap, grommet, or your custom design. Our bottom attachments can be made with snap bands, corded cuffs, or reinforced cuffs for extra wear protection.
Specification Sheet of Industrial Filter Bag
| Fibre types | Product code | Weight (g/m2) | Continuous Temperature | Peak Temperature | Remark |
|---|---|---|---|---|---|
| Polyester | PE | 450-600 | 130°C | 150°C | Good resistance to oxidation,while limited resistance toacids and alkalis. Service lifewill be affected by hydrolysisat high temperature. |
| Polyacryinitrile Homo polymer | PAC | 500-550 | 130°C | 150°C | Good resistance to hydrolysis. |
| Polypropylene | PPS | 500-650 | 160°C | 190°C | Moderate resistance to oxida-tion, but excellent resistance toacids, alkali's and hydrolysis. |
| m-Aramide | Nomex/Conex | 400-600 | 204°C | 250°C | Service life will be affectedby hydrolysis at high tem-perature. |
| Polyimide | PI/P84 | 750-800 | 240°C | 260°C | Excellent resistance to highpeak temperature. |
| Polytetrafluoro ethylene | PTFE | 500-550 | 240°C | 260°C | Excellent resistance to allchemical influences. |
| Fiberglass | GL | 750-900 | 240°C | 260°C | Excellent resistance to oxida-tion. Sensitive to mechanicalstress. |
Post Treatment：Heat Setting /Singeing /Glazing /Dipping /MembranerWater and Oil Proof / Low Adhesion
Size：Support customization for various sizes
Sewing Technologies：Special welding/membrane lamination/ functional joining technologies
Top and Bottom Configurations：OEM & Customization Supported
Get Custom Filter Bag Solutions for Your Dust Collection System
Send us your baghouse filter bags specifications and receive a professional recommendation within 24 hours.
Quality & Consistency You Can Rely On
Our focus is not just supplying filter bags, but reducing your total filtration cost over time.
01
Consistent raw material sourcing
02
Controlled manufacturing process
03
Strict dimensional tolerance
04
Each batch inspected before shipment
Our flexible supply chain management facilitates fast response-time to meet customer requirements and market changes.
01
Raw Material
Supplier Diversification, Material Sustitutability
02
Inventory
Dynamic Forecasting, Key Material Stockpiling
03
Collaboration
Collaborative Demand Forecasting, Custom Solutions
04
Manufacturing
Quick Line Changeover & Production Switching Multi-Skilled Workforce,
05
Warehousing
Efficient Space Utilization, Rapid Turnover
06
Shipping & Delivery
Alternative Transportation Solutions, Quick Turnaround Order
Serving 10,000+ clients worldwide,Exported to more than 40 countries and regions worldwide.
We actively participates in the global supply chain service market, and we are committed to providing customers with high-quality products and services to promote local economic development.
OEM Market
Maintenance Market
From Sample Analysis to Engineered Filter Solutions
Our Services
Step 1
Sample Analysis & Application Review
- Analyze fabric structure and material composition
- Review wear patterns, clogging or failure reasons
- Evaluate dust characteristics and operating conditions
Step 2
R&D & Material Engineering
- Needle felt material selection and optimization
- Fiber blend, weight and permeability design
- Surface treatments (PTFE membrane, singeing, glazing)
Step 3
Filter Bag & Cage Design
- Accurate size and construction
- Cage wire layout and surface finishing
- Compatible with pulse jet and cleaning systems
Step 4
Fast & Transparent Quotation
-
Material specification
-
Unit price & MOQ
-
Lead time and delivery terms
Step 5
Sampling & Confirmation
- Custom samples for testing
- Performance confirmation before mass production
- Adjustments based on test feedback
Step 6
Manufacturing, QC & Delivery
- All products are manufactured under strict quality control and shipped with export-ready packaging.
Ongoing technical support is available after delivery.
Please share your contact information to download the documents.
Our engineers may follow up to ensure the information fits your application.
Contact us to discuss your project and long-term filtration solutions.
All information will be kept confidential.