Article List
- The difference from membrane dust filter bagsThe film-coated dust filter bag is a layer of polytetrafluoroethylene film compounded on the surface of the ordinary dust filter bag filter material. The surface is smooth and resistant to various chemical substances. It can play the role of waterproof, oil-proof and anti-static. effect. Therefore,Industry news September 14, 2022
- Leak detection operation of phosphor powder in asphalt filter bagAsphalt mixer dust bag fluorescent powder leak detection is generally carried out after the filter bag is newly installed, or when the smoke and dust discharge exceeds the standard, to detect whether there are leaks and ensure that the discharge meets the standard. If the inspected dust collector isIndustry news September 13, 2022
- PPS needle felt filter bags characteristicsPPS dust filter bag filter material needle felt material is an excellent high temperature resistant filter material. PPS needle felt filter media has the following characteristics:1. The continuous working temperature can reach 190℃, and the instantaneous temperature is 220℃.2. It can be used when tIndustry news September 12, 2022
- Points to consider when choosing a dust filter baghe fabric design of the normal temperature dust collector bag should try to pursue high-efficiency filtration, easy dust stripping and durable effects. The dust filter bag is an important accessory in the dust collector. The bag filter generally selects the required dust bag according to the natureIndustry news September 09, 2022
- Advantages of PTFE membrane filter bagsPolytetrafluoroethylene (PTFE) is commonly known as "the king of plastics". Its special molecular structure makes it invulnerable to all poisons (it will not change when boiled in aqua regia). It can work for a long time at -190~250 °C and is widely used. In environmental protection, sealing, aerospIndustry news September 08, 2022
- Main faults and avoidance methods of air filter bag1. Burning: The main reason for the burning of the dust collector bag is that the initial layer thickness on the surface of the dust collector bag is not enough, and the temperature of the flue gas is too high. If the temperature of the flue gas treated by the dust collector for a long time exceedsIndustry news September 07, 2022
- Classification of dust collector filter bagsClassification of dust collector bags:1. Normal temperature dust collector bag: The normal temperature bag is mainly made of polyester, polypropylene, acrylic and other fibers through non-woven and textile processes. It has good air permeability, smooth surface, good dimensional stability, easy to pIndustry news September 06, 2022
- Analysis of Damage Causes of Dust Collector Filter BagsThe reason for the damage of the upper bag mouthThe damage of the bag mouth mostly occurs at the contact part of the filter bag expansion ring and the flower plate hole and within 30cm below the bag mouth. The main reason is that the filter bag expansion ring and the flower plate hole do not cooperaIndustry news September 02, 2022
- Precautions for prolonging the life of air dust filter bag1. The old cloth bags of the new process should not be mixed, so as to avoid the different damage times affecting the normal operation of the dust removal equipment. 2. Blockage of the dust bag. When the cloth bag is blocked, the resistance increases, which can be shown by the increase in the rIndustry news August 31, 2022
- Measures to reduce the moisture content of the dust filter bag1. Reasonable control of material moistureThe materials required for production in some industries have high moisture content and high temperature, and a large amount of steam is generated after entering the bag filter. Before entering the bag filter, the raw materials, fuels and mixed materials shoIndustry news August 30, 2022