Author: Site Editor Publish Time: 2021-12-02 Origin: Site
Bag type dust collector
①The filter cloth should not be hung too loosely or tightly. Too loose and easy to accumulate dust, and too tight to be easily damaged.
②The old and new filter bags should not be mixed to avoid the different damage time from affecting the normal operation of the equipment. The editor of Wanguan Hardware Machine Power Grid introduces everyone
③The replaced filter bag should be blown clean with compressed air first, and then check whether there is any hole. After repairing the hole, leave it for replacement. If the filter bag is stuck with dust, rinse it with water, and leave it to be replaced after it is allowed to dry.
Wooden earphones
① When installing the fungus filter bag, do not hang the filter bag with hard objects, so as not to damage the synthetic fiber and cause the filter bag to perforate in a short time.
②Should stop when the filter cake is of suitable thickness, and work again after unloading the cake, so as to extend the service life of the filter bag.
③When changing the filter bag, do not use a hard object to directly buckle the filter bag and pull it down. Use force to pull up the auxiliary belt sewn on the filter bag.
④When unloading the filter cake, the cake unloading tool should be as parallel as possible to the filter cloth to prevent damage to the filter bag. The editor of Wanguan Hardware Machine Power Grid introduces everyone
Filter press
① When installing the filter cloth, make sure that part of the filter cloth on the plate frame is flat and fixed, so as not to damage the filter cloth when the plate frame is compressed due to the filter cloth being discounted.
②The time for the filter cake to stick to the filter cloth should not be too long, too long will cause the filter cloth to deform and sag.
③When unloading the filter cake, shovel the filter cake in the direction of the filter cloth.
Belt filter
①The required filter cloth length (including joint length) should be measured correctly.
②When sewing, make sure that the wefts at both ends are overlapped or parallel to prevent the filter cloth from running off during operation. The editor of Wanguan Hardware Machine Power Grid introduces everyone
③The interface should pay attention to the direction of operation, so as to prevent the scraper from blocking the filter cloth interface and damaging the filter cloth or blocking the advancement of the filter cloth.
Vertical disc machine (vertical disc machine)
①The selected filter cloth should not be too thick, which is not conducive to sewing when the filter bag is installed on the machine.
②The surface of the selected filter cloth should not be too smooth, and too smooth is not suitable for the formation of filter cake, which will affect the production efficiency. The editor of Wanguan Hardware Machine Power Grid introduces everyone
Labor type machine (vertical belt filter)
① The filter cloth is required to have a certain thickness and strong tensile strength.
②The joints should ensure that the wefts at both ends are coincident or parallel to prevent the filter cloth from running off during operation.
③The interface should pay attention to the direction of operation, so as to prevent the scraper from blocking the filter cloth interface and damaging the filter cloth or blocking the advancement of the filter cloth.