vicky@aokai.net.cn   info@aokai.net.cn
NEWS AND EVENTS
Home » News » Industry news » The reason of dust collector has a large amount of dust

The reason of dust collector has a large amount of dust

Views:0     Author:Site Editor     Publish Time: 2020-12-30      Origin:Site

The bag dust collector has poor dust removal during use, which causes the dust collector to fail to operate normally and to remove dust.

Reason 1: The dust filter bag of the bag filter is too tight. Solution: Adjust the tension of the dust filter bag to relax the filter bag.

Reason 2: The dust filter bag of the bag filter is too loose. Solution: Adjust the tension of the dust filter bag to make the filter bag tighter.

Reason 3: The dust of the bag filter is too humid. Solution: Check the dust damp reason of the bag filter and remove it.

Reason 4: The dust filter bag of the bag filter is in an inflated state. Solution: Check the seal of the bag filter, eliminate the fault, and eliminate the expansion state.

Reason 5: The dust removal mechanism of the bag filter is faulty or the dust removal electromagnetic pulse valve is faulty. Solution: Check and adjust the dust removal mechanism and electromagnetic pulse valve of the bag filter, and eliminate the fault.

Reason 6: The time setting of the dust removal timer of the bag filter is incorrect or malfunctions. Solution: Analyze the cause of the electronic control or its own cause and eliminate the inspection and set the time setting.

Reason 7: The amount of blowback of the dust collector is insufficient. Solution: Check the cause and increase the amount of blowback.

CONTACT US

CONTACT US

  0523-80235941 / +8618351161652
  vicky@aokai.net.cn ,info@aokai.net.cn
  No.80 Fuqian Road Chengbei Industrial Park Economic Zone Jingjiang city Jiangsu province China 214500

SEND US A LETTER

CONTACT US
© 2020 Jiangsu Aokai Environmental Technology Co., Ltd. All rights reserved. Support By Leadong.