1. The single-section dust removal skeleton generally has space for bag replacement. First, take out the dust removal skeleton together with the dust removal cloth bag, and use a knife or other tools to remove the dust removal cloth bag attached to the dust removal skeleton. (Do not damage the dust
When designing the bag filter, increasing the filtering wind speed will not cause any obvious response from users in a short period of time, but greatly shorten the service life of the filter bag. So, how to prolong the service life of the dust filter bag?1. Select the appropriate filter materialThe
1.2 Select according to filter material characteristics1.2.1 PolyesterPolyester filter materials are usually used in low temperature occasions, and usually do not need to be coated. Only when the emission requirement is less than 30 mg/Nm3, or when the dust is very fine and the humidity is high, the
Well-designed structureThe structure of the filter bag should meet the requirements of filtration and dust removal of the matching bag filter, and it should be easy to install and reliable in sealing. The corresponding filtering area and good filtering state should be pursued. Reasonable coordinatio
1. Blockage of the dust bagWhen the cloth bag is blocked, the resistance can be shown by the increase in the reading of the differential pressure gauge. The blockage of the cloth bag is the main reason for the wear, perforation and falling off of the cloth bag. The cause of the blockage of the dust
1. Acrylic dust-removing cloth bag acrylic needle-punched felt, whose chemical name is polyacrylonitrile, is made into felt by needle punching with it as the raw material, and after special water repellent treatment, the acrylic medium-temperature hydrolysis-resistant needle-punched filter felt is o