Views: 0 Author: Site Editor Publish Time: 2022-11-17 Origin: Site
1. Before the installation of the filter bag, it is necessary to remove the sundries on the air chamber and flower plate, and then remove all installation remnants in the box and ash hopper, such as lifting lugs, tools, small parts, welding rods, welding slag, etc.
2. In addition to the size of the civil foundation, it is also necessary to check the quality of the foundation and then install it after it is qualified
3. Each part of the ash bucket, box, air chamber and the connection between each part of the bag dust collector should have good sealing performance. After each part is assembled, kerosene penetration method is used for inspection.
4. Air tightness test should be done at the connection of the injection system pipeline and components, and there should be no air leakage phenomenon.
5. When counting all parts, there must be a list. Check the production parts one by one according to the list, confirm whether any parts are missing, list the missing parts and contact the company in order to make the required parts complete and equipped as soon as possible.
6, check the quality of each part is qualified, there is no deformation and rust, if not qualified should be repaired or replaced. The purchased parts must have quality certificate and no obvious appearance damage before assembly.
7, the installation of color plate and galvanized plate must be under the first, the first inside and outside the construction principle, to prevent rain into the insulation area, and the appearance should be beautiful.
Jiangsu Aokai Environmental Protection provides customers with exclusive custom service of dust collector bag, in order to meet the needs of customers for different working conditions, and has been fully recognized by the majority of users. Aokai selected high quality Dahua fiber, using the latest international technology, every square meter of the filter material are processed by high temperature heat molding, to ensure the maximum size stability of the filter material. According to the requirements of different working conditions, AOKI can carry out the treatment of the filter material, such as burning, pressing, coating, impregnation, film coating, waterproof and oil proof. According to the requirements of customers' dust removal equipment, the filter bag is specially made to ensure the tight fit between the filter bag and the flower plate, so as to avoid the dust leakage from the hole of the flower plate.