1. Before the installation of the filter bag, it is necessary to remove the sundries on the air chamber and flower plate, and then remove all installation remnants in the box and ash hopper, such as lifting lugs, tools, small parts, welding rods, welding slag, etc.2. In addition to the size of the c

1. Burning: The main reason for the burning of the dust collector bag is that the initial layer thickness on the surface of the dust collector bag is not enough, and the temperature of the flue gas is too high. If the temperature of the flue gas treated by the dust collector for a long time exceeds

(1) The pre-coating of the filter bag of the bag filter should be cut off and stopped before the start of the combustion or production process, and the air inlet valve of the filter should be opened (including the air inlet and outlet valves of each filter bag room) .(2) Start the fan to gradually i

Precoat is a dry, chemically inert, non-toxic, and easy-to-use powder that can be used to wrap or condition filter bags in baghouses to improve filtration efficiency and effectiveness. Think of it as forming a uniform, three-dimensional, porous assist or enhancer in the baghouse.The precoat has a na

1. The effect of high temperature on the filter bagWhen the exhaust gas temperature exceeds 160 ℃, the temperature has a significant impact on the life of the filter bag. As the temperature increases, the life of the filter bag will gradually increase. When the temperature reaches a certain temperat

Composition and classification of filter bagsThe filter bag is the executive part of the dust filter of the bag filter. The general filter bag unit is composed of a filter bag made of flexible filter material and accessories that play an auxiliary role.According to the direction of dust, it can be d