Precoat is a dry, chemically inert, non-toxic, and easy-to-use powder that can be used to wrap or condition filter bags in baghouses to improve filtration efficiency and effectiveness. Think of it as forming a uniform, three-dimensional, porous assist or enhancer in the baghouse.The precoat has a na

1. Burning: The main reason for the burning of the dust collector bag is that the initial layer thickness on the surface of the dust collector bag is not enough, and the temperature of the flue gas is too high. If the temperature of the flue gas treated by the dust collector for a long time exceeds

1. The effect of high temperature on the filter bagWhen the exhaust gas temperature exceeds 160 ℃, the temperature has a significant impact on the life of the filter bag. As the temperature increases, the life of the filter bag will gradually increase. When the temperature reaches a certain temperat

1. In order to prevent the bag of the bag filter from being damaged, care must be taken during installation. Avoid sharp objects scratching the bag. Do not stand or kneel on the cloth bag during installation, and be very careful when holding the cloth bag, do not let anything hit the cloth bag, espe

First, the poor cleaning of the filter bag is mainly manifested in:The cleaning times are frequent and the cleaning time is too long. The frequency of cleaning is too frequent to loosen the fiber tissue of the filter bag, and then add fine dust in the exhaust gas to block the filter bag. If the clea

1. The single-section dust removal skeleton generally has space for bag replacement. First, take out the dust removal skeleton together with the dust removal cloth bag, and use a knife or other tools to remove the dust removal cloth bag attached to the dust removal skeleton. (Do not damage the dust