Solution to Condensation of Dust Collector BagThe shell of the bag pulse dust collector often has air leaking in, causing the air temperature in the dust collector to be lower than the dew point, and the dust filter bag will get damp, so that the dust is not loosely attached to the filter bag, but s

1.2 Filter bag specificationsThe cross-section of the filter bag is round, size: φ135×80001.3 Filter bag material: 50%PPS+50%PTFE (fabric)+PTFE (base cloth)1.4 Filter bag filter method: external filter1.5 Filter bag cleaning methodPulse cleaning is adopted, and the cleaning pressure is 0.25～0.35MPa.

In order to prolong the service life and dust removal efficiency of the bag filter, air leakage must be prevented. Here are two effective methods to prevent air leakage:Strengthen the seal(1) Strengthen the sealing of the dust removal system: To prevent air leakage, it is also necessary to strengthe

When the bag filter is stopped for a long time, pay attention to the equipment to prevent moisture, pay attention to the moisture in the filter bag room, and prevent the filter bag from being hydrolyzed and corroded by moisture.1. Exhaust the high temperature gas from the dust removal box and introd

1. The dust collector cloth bag installation staff should dress well, and do not bring tobacco, matchsticks, lighters, keys, fruit knives and other items to prevent falling into the dust cloth bag. Do not wear nails or hard uppers. The shoes are installed. The staff who install the dust-removing bag