The reason for the damage of the upper bag mouthThe damage of the bag mouth mostly occurs at the contact part of the filter bag expansion ring and the flower plate hole and within 30cm below the bag mouth. The main reason is that the filter bag expansion ring and the flower plate hole do not coopera

Applying a precoat can extend the life of the filter bag and protect the filter bag from clogging. Due to the high melting point of the precoat, it also resists harmful sparks when used as a control layer.In summary, the primary benefits of using our precoats in dust collector bags include:1. Enhanc

After the dust bag is used for a long time, more and more dust is deposited on the surface, and the dust removal efficiency will decrease. Now what are the steps of the cleaning method of the dust bag, here is an introduction for you.Cleaning of dust bag: choose appropriate detergent and strictly pr

1. Untimely discharge of ashSolution:Shorten the ash discharge interval according to the working conditions, and discharge ash once per shift and twice a day. For combustible and explosive dust, it should be continuously unloaded with the production.2. Air leakage from the ash discharge portIn the b

1. There is air leakage in the bag filter of the boiler. Due to the phenomenon of air leakage in the dust collector, a large amount of cold air from the outside is sucked into the dust collector, so that the local air temperature of the bag filter drops sharply, and the water in the air is analyzed,

1. Set up heat tracing devices for the box and ash hopper, and strengthen the heat preservation to increase the temperature in the box to ensure that the temperature in the box is 15°C higher than the dew point temperature; for dust with strong hygroscopicity, the temperature of the box should be ke