1. There should be sufficient strength, rigidity, verticality and dimensional accuracy to prevent deformation under compression, damage during transportation, contact with each other after the filter bags are placed in the dust collector, difficulty in bagging, and friction between the bag frame and

1. Appropriate filter material: according to the temperature, temperature and chemical characteristics of the gas; particle size, weight, shape, whether it is pecking or not, as well as dust concentration, filtration speed, dust removal method, emission concentration and the work of the bag filter S

Before the cage is put into the filter bag, it must be strictly checked for deformation, burrs, desoldering, bending, etc. The bag cage with quality problems cannot be used

In the bag filter, in order to improve the filtration efficiency, it will be equipped with a venturi dust removal frame. After the venturi tube is installed at the mouth of the frame, not only can the filtration be promoted, but also the ultra-long filter bag has an excellent dust removal effect.The

Technical requirements for sintering plant dust removal skeleton bag cage:1. The processing method and surface treatment of the dust removal skeleton bag cage should fully consider the boiler operating conditions and the requirements of the flue gas characteristics, and the filter bag should operate

The dust collector filter bag cage manufacturer analyzes the characteristics of the dust collector filter bag cage1. The filter cage of the dust collector adopts a circular structure, the longitudinal ribs and anti-support rings of the bag cage are evenly distributed, and have sufficient strength an