Filter Cage

These articles are all highly relevant Filter Cage. I believe this information can help you understand Filter Cage's professional information. If you want to know more, you can contact us at any time, we can provide you with more professional guidance.
  • How to prevent the filter bag cage from rusting
    The dust removal skeleton is the main accessories of the bag filter, is the frame of the bag, its quality directly affects the filter state and service life of the bag filter and the dust removal effect of the bag filter. The correct and effective prevention of the rust of the dust removal skeleton
  • Dust filter bag cage manufacturing problem
    Dust filter bag cage manufacturing problem1. Cage dust filter requires the support ring and longitudinal reinforcement to be evenly distributed, and there should be satisfactory strength and stiffness, which can accept the gas pressure of filter bag in the filtration and ash removal condition, and c
  • Dust filter bag cage measurement methods
    1. Measure the diameter of the dust filter, the outer diameter should be smaller than the inner diameter of the dust bag.2. The spacing between the ring beam of the dust removal frame is 200, which is basically finalized.3. The total length of the dust removal skeleton is about 5 cm less than the du
  • Reasons that affect the life of the dust filter bag cage
    (1) The influence of the size of the dust removal skeleton: In the geometric size of the dust removal bag cage, the diameter of the dust removal skeleton, the gas inlet, and the shape and size of the exhaust pipe are the important influencing factors. The standard scale can achieve the best dust rem
  • The specific production standard of filter bag cage
    In the process of welding and manufacturing the frame of the bag cage of the dust collector, it is required that the welding point be firm, there is no burr and welding flash, the whole frame structure is firm and reliable, and the shape is stable. If the burrs of the skeleton are not cleaned, the s
  • The role of dust filter bag cage in dust collector
    The dust removal frame is a key part of the bag filter operation process. Usually the cylindrical filter bag is vertically hung on the dust collector. The dust removal frame is the rib of the filter bag. It should be lightweight, easy to install and maintain, and directly affect the quality. The fil
  • Total 3 pages  Go to Page
  • Go


Tel: +86 523 8050 6316
Mob: +86 185 5269 6052
Address: 80 Kangzhuang Road, Chengbei Industrial Park, JingJiang, JiangSu Province, China
© 2020 Jiangsu Aokai Environmental Technology Co., Ltd. All rights reserved. Support By Leadong.